Samsung Galaxy Young 2 Stock Firmware (SM-G130BT, SM-G130BU & SM-G130E)

Samsung Galaxy Young 2 Stock Firmware (SM-G130BT, SM-G130BU & SM-G130E)
Flash/unbrick or upgrade your device with the firmwares below using odin

Learn how to use odin from here 

SAMSUNG GALAXY SM-G130BT STOCK FIRMWARE 

Brazil
G130BTUBU0APA2_ZTO0APA2

G130BTUBU0APB1_ZTO0APA2

...................................................................................................................................................................

SAMSUNG GALAXY SM-G130BU STOCK FIRMWARE

Brazil
G130BUVJU0AOE3_ZTM0AOE1 TIM

G130BUVJU0AOE3_ZVV0AOE3 Vivo

G130BUVJU0APA1_ZTO0APA1

...................................................................................................................................................................

SAMSUNG GALAXY SM-G130E STOCK FIRMWARE

Arabic

G130EXXU0AOE2_OJV0AOF1

India
G130EXXU0AOE2_ODD0AOD2

Saudi Arabia
G130EXXU0AOE2_G130EOJV0AOF1


To flash or upgrade your Galaxy SM-G130BT, SM-G130BU & SM-G130E with any of this firmware,


- Download and install samsung drivers

- Download and launch odin

- Turn off your phone

- Boot phone into download mode by holding vol down + home + power button

- When you see the yellow triangle, press volume up to continue into odin mode

- Now connect the phone to PC using a USB cord

- Wait for odin to detect the phone (you will see the COM Port) 

- Now click AP in odin interface then select the firmware 

- After the firmware is successfully loaded, 

- Click Start button 

- Wait for process to complete 

- When you see PASS in green then the process is complete. 

- Wait for the device to reboot

Its always good to do a factory reset after doing this process
For a more detail process on how to flash or upgrade Samsung devices, click here




For other Samsung firmwares, click here